weka.gui.visualize

Class VisualizePanel

java.lang.Object

java.awt.Component

java.awt.Container

javax.swing.JComponent

javax.swing.JPanel

weka.gui.visualize.PrintablePanel

weka.gui.visualize.VisualizePanel

All Implemented Interfaces:

java.awt.image.ImageObserver, java.awt.MenuContainer, java.io.Serializable, javax.accessibility.Accessible, PrintableHandler

Direct Known Subclasses:

ThresholdVisualizePanel

public class VisualizePanel
extends PrintablePanel

This panel allows the user to visualize a dataset (and if provided) a classifier's/clusterer's predictions in two dimensions. If the user selects a nominal attribute as the colouring attribute then each point is drawn in a colour that corresponds to the discrete value of that attribute for the instance. If the user selects a numeric attribute to colour on, then the points are coloured using a spectrum ranging from blue to red (low values to high). When a classifier's predictions are supplied they are plotted in one of two ways (depending on whether the class is nominal or numeric).
For nominal class: an error made by a classifier is plotted as a square in the colour corresponding to the class it predicted.
For numeric class: predictions are plotted as varying sized x's, where the size of the x is related to the magnitude of the error.

Version:

$Revision: 15104 $

Author:

Mark Hall (mhall@cs.waikato.ac.nz), Malcolm Ware (mfw4@cs.waikato.ac.nz)

See Also:

Serialized Form

Nested Class Summary

Nested classes/interfaces inherited from class javax.swing.JComponent

javax.swing.JComponent.AccessibleJComponent

Nested classes/interfaces inherited from class java.awt.Component

java.awt.Component.BaselineResizeBehavior

Field Summary

Fields inherited from class javax.swing.JComponent

TOOL_TIP_TEXT_KEY, UNDEFINED_CONDITION, WHEN_ANCESTOR_OF_FOCUSED_COMPONENT, WHEN_FOCUSED, WHEN_IN_FOCUSED_WINDOW

Fields inherited from class java.awt.Component

BOTTOM_ALIGNMENT, CENTER_ALIGNMENT, LEFT_ALIGNMENT, RIGHT_ALIGNMENT, TOP_ALIGNMENT

Fields inherited from interface java.awt.image.ImageObserver

ABORT, ALLBITS, ERROR, FRAMEBITS, HEIGHT, PROPERTIES, SOMEBITS, WIDTH

Constructor Summary

Constructors

Constructor and Description
VisualizePanel() Constructor
VisualizePanel(VisualizePanelListener ls) This constructor allows a VisualizePanelListener to be set.

Method Summary

Modifier and Type	Method and Description
void	addActionListener(java.awt.event.ActionListener act) Add a listener for this visualize panel
void	addPlot(PlotData2D newPlot) Set a new plot to the visualize panel
void	applySettings(Settings settings, java.lang.String ownerID) Apply settings
int	getCIndex() Get the index of the attribute selected for coloring
Instances	getInstances() Get the master plot's instances
java.lang.String	getName() Returns the name associated with this plot.
weka.gui.visualize.VisualizePanel.PlotPanel	getPlotPanel() Returns the underlying plot panel.
boolean	getShowAttBars() Gets whether or not attribute bars are being displayed.
boolean	getShowClassPanel() Gets whether or not the class panel is being displayed.
int	getSIndex() Get the index of the shape selected for creating splits.
int	getXIndex() Get the index of the attribute on the x axis
int	getYIndex() Get the index of the attribute on the y axis
static void	main(java.lang.String[] args) Main method for testing this class
void	removeAllPlots() Removes all the plots.
void	setColourIndex(int index) Sets the index used for colouring.
void	setColourIndex(int index, boolean enableCombo) Set the index for colouring.
void	setInstances(Instances inst) Tells the panel to use a new set of instances.
void	setLog(Logger newLog) Sets the Logger to receive informational messages
void	setMasterPlot(PlotData2D newPlot) Set the master plot for the visualize panel
void	setName(java.lang.String plotName) Set a name for this plot
void	setShapes(java.util.ArrayList<java.util.ArrayList<java.lang.Double>> l) This will set the shapes for the instances.
void	setShowAttBars(boolean sab) Set whether the attribute bars should be shown or not.
void	setShowClassPanel(boolean scp) Set whether the class panel should be shown or not.
void	setSIndex(int index) Set the shape for creating splits.
void	setUpComboBoxes(Instances inst) initializes the comboboxes based on the data
void	setXIndex(int index) Set the index of the attribute for the x axis
void	setYIndex(int index) Set the index of the attribute for the y axis

Methods inherited from class weka.gui.visualize.PrintablePanel

getSaveDialogTitle, getWriter, getWriters, getXScale, getYScale, saveComponent, setSaveDialogTitle, setScale

Methods inherited from class javax.swing.JPanel

getAccessibleContext, getUI, getUIClassID, setUI, updateUI

Methods inherited from class javax.swing.JComponent

addAncestorListener, addNotify, addVetoableChangeListener, computeVisibleRect, contains, createToolTip, disable, enable, firePropertyChange, firePropertyChange, firePropertyChange, getActionForKeyStroke, getActionMap, getAlignmentX, getAlignmentY, getAncestorListeners, getAutoscrolls, getBaseline, getBaselineResizeBehavior, getBorder, getBounds, getClientProperty, getComponentPopupMenu, getConditionForKeyStroke, getDebugGraphicsOptions, getDefaultLocale, getFontMetrics, getGraphics, getHeight, getInheritsPopupMenu, getInputMap, getInputMap, getInputVerifier, getInsets, getInsets, getListeners, getLocation, getMaximumSize, getMinimumSize, getNextFocusableComponent, getPopupLocation, getPreferredSize, getRegisteredKeyStrokes, getRootPane, getSize, getToolTipLocation, getToolTipText, getToolTipText, getTopLevelAncestor, getTransferHandler, getVerifyInputWhenFocusTarget, getVetoableChangeListeners, getVisibleRect, getWidth, getX, getY, grabFocus, hide, isDoubleBuffered, isLightweightComponent, isManagingFocus, isOpaque, isOptimizedDrawingEnabled, isPaintingForPrint, isPaintingTile, isRequestFocusEnabled, isValidateRoot, paint, paintImmediately, paintImmediately, print, printAll, putClientProperty, registerKeyboardAction, registerKeyboardAction, removeAncestorListener, removeNotify, removeVetoableChangeListener, repaint, repaint, requestDefaultFocus, requestFocus, requestFocus, requestFocusInWindow, resetKeyboardActions, reshape, revalidate, scrollRectToVisible, setActionMap, setAlignmentX, setAlignmentY, setAutoscrolls, setBackground, setBorder, setComponentPopupMenu, setDebugGraphicsOptions, setDefaultLocale, setDoubleBuffered, setEnabled, setFocusTraversalKeys, setFont, setForeground, setInheritsPopupMenu, setInputMap, setInputVerifier, setMaximumSize, setMinimumSize, setNextFocusableComponent, setOpaque, setPreferredSize, setRequestFocusEnabled, setToolTipText, setTransferHandler, setVerifyInputWhenFocusTarget, setVisible, unregisterKeyboardAction, update

Methods inherited from class java.awt.Container

add, add, add, add, add, addContainerListener, addPropertyChangeListener, addPropertyChangeListener, applyComponentOrientation, areFocusTraversalKeysSet, countComponents, deliverEvent, doLayout, findComponentAt, findComponentAt, getComponent, getComponentAt, getComponentAt, getComponentCount, getComponents, getComponentZOrder, getContainerListeners, getFocusTraversalKeys, getFocusTraversalPolicy, getLayout, getMousePosition, insets, invalidate, isAncestorOf, isFocusCycleRoot, isFocusCycleRoot, isFocusTraversalPolicyProvider, isFocusTraversalPolicySet, layout, list, list, locate, minimumSize, paintComponents, preferredSize, printComponents, remove, remove, removeAll, removeContainerListener, setComponentZOrder, setFocusCycleRoot, setFocusTraversalPolicy, setFocusTraversalPolicyProvider, setLayout, transferFocusDownCycle, validate

Methods inherited from class java.awt.Component

action, add, addComponentListener, addFocusListener, addHierarchyBoundsListener, addHierarchyListener, addInputMethodListener, addKeyListener, addMouseListener, addMouseMotionListener, addMouseWheelListener, bounds, checkImage, checkImage, contains, createImage, createImage, createVolatileImage, createVolatileImage, dispatchEvent, enable, enableInputMethods, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, getBackground, getBounds, getColorModel, getComponentListeners, getComponentOrientation, getCursor, getDropTarget, getFocusCycleRootAncestor, getFocusListeners, getFocusTraversalKeysEnabled, getFont, getForeground, getGraphicsConfiguration, getHierarchyBoundsListeners, getHierarchyListeners, getIgnoreRepaint, getInputContext, getInputMethodListeners, getInputMethodRequests, getKeyListeners, getLocale, getLocation, getLocationOnScreen, getMouseListeners, getMouseMotionListeners, getMousePosition, getMouseWheelListeners, getParent, getPeer, getPropertyChangeListeners, getPropertyChangeListeners, getSize, getToolkit, getTreeLock, gotFocus, handleEvent, hasFocus, imageUpdate, inside, isBackgroundSet, isCursorSet, isDisplayable, isEnabled, isFocusable, isFocusOwner, isFocusTraversable, isFontSet, isForegroundSet, isLightweight, isMaximumSizeSet, isMinimumSizeSet, isPreferredSizeSet, isShowing, isValid, isVisible, keyDown, keyUp, list, list, list, location, lostFocus, mouseDown, mouseDrag, mouseEnter, mouseExit, mouseMove, mouseUp, move, nextFocus, paintAll, postEvent, prepareImage, prepareImage, remove, removeComponentListener, removeFocusListener, removeHierarchyBoundsListener, removeHierarchyListener, removeInputMethodListener, removeKeyListener, removeMouseListener, removeMouseMotionListener, removeMouseWheelListener, removePropertyChangeListener, removePropertyChangeListener, repaint, repaint, repaint, resize, resize, setBounds, setBounds, setComponentOrientation, setCursor, setDropTarget, setFocusable, setFocusTraversalKeysEnabled, setIgnoreRepaint, setLocale, setLocation, setLocation, setSize, setSize, show, show, size, toString, transferFocus, transferFocusBackward, transferFocusUpCycle

Methods inherited from class java.lang.Object

equals, getClass, hashCode, notify, notifyAll, wait, wait, wait

Constructor Detail

VisualizePanel

public VisualizePanel(VisualizePanelListener ls)

This constructor allows a VisualizePanelListener to be set.

Parameters:

ls - the listener to use

VisualizePanel

public VisualizePanel()

Constructor

Method Detail

setLog

public void setLog(Logger newLog)

Sets the Logger to receive informational messages

Parameters:

newLog - the Logger that will now get info messages

setShowAttBars

public void setShowAttBars(boolean sab)

Set whether the attribute bars should be shown or not. If turned off via this method then any setting in the properties file (if exists) is ignored.

Parameters:

sab - false if attribute bars are not to be displayed.

getShowAttBars

public boolean getShowAttBars()

Gets whether or not attribute bars are being displayed.

Returns:

true if attribute bars are being displayed.

setShowClassPanel

public void setShowClassPanel(boolean scp)

Set whether the class panel should be shown or not.

Parameters:

scp - false if class panel is not to be displayed

getShowClassPanel

public boolean getShowClassPanel()

Gets whether or not the class panel is being displayed.

Returns:

true if the class panel is being displayed.

applySettings

public void applySettings(Settings settings,
                          java.lang.String ownerID)

Apply settings

Parameters:

settings - the settings to apply

ownerID - the ID of the owner perspective, panel etc. to use when looking up settings

setColourIndex

public void setColourIndex(int index,
                           boolean enableCombo)

Set the index for colouring.

Parameters:

index - the index of the attribute to use for colouring

enableCombo - false if the colouring combo box should be disabled

setColourIndex

public void setColourIndex(int index)

Sets the index used for colouring. If this method is called then the supplied index is used and the combo box for selecting colouring attribute is disabled.

Parameters:

index - the index of the attribute to use for colouring

setXIndex

public void setXIndex(int index)
               throws java.lang.Exception

Set the index of the attribute for the x axis

Parameters:

index - the index for the x axis

Throws:

java.lang.Exception - if index is out of range.

getXIndex

public int getXIndex()

Get the index of the attribute on the x axis

Returns:

the index of the attribute on the x axis

setYIndex

public void setYIndex(int index)
               throws java.lang.Exception

Set the index of the attribute for the y axis

Parameters:

index - the index for the y axis

Throws:

java.lang.Exception - if index is out of range.

getYIndex

public int getYIndex()

Get the index of the attribute on the y axis

Returns:

the index of the attribute on the x axis

getCIndex

public int getCIndex()

Get the index of the attribute selected for coloring

Returns:

the index of the attribute on the x axis

getSIndex

public int getSIndex()

Get the index of the shape selected for creating splits.

Returns:

The index of the shape.

setSIndex

public void setSIndex(int index)
               throws java.lang.Exception

Set the shape for creating splits.

Parameters:

index - The index of the shape.

Throws:

java.lang.Exception - if index is out of range.

addActionListener

public void addActionListener(java.awt.event.ActionListener act)

Add a listener for this visualize panel

Parameters:

act - an ActionListener

setName

public void setName(java.lang.String plotName)

Set a name for this plot

Overrides:

setName in class java.awt.Component

Parameters:

plotName - the name for the plot

getName

public java.lang.String getName()

Returns the name associated with this plot. "" is returned if no name is set.

Overrides:

getName in class java.awt.Component

Returns:

the name of the plot

getInstances

public Instances getInstances()

Get the master plot's instances

Returns:

the master plot's instances

setShapes

public void setShapes(java.util.ArrayList<java.util.ArrayList<java.lang.Double>> l)

This will set the shapes for the instances.

Parameters:

l - A list of the shapes, providing that the objects in the lists are non editable the data will be kept intact.

setInstances

public void setInstances(Instances inst)

Tells the panel to use a new set of instances.

Parameters:

inst - a set of Instances

setUpComboBoxes

public void setUpComboBoxes(Instances inst)

initializes the comboboxes based on the data

Parameters:

inst - the data to base the combobox-setup on

removeAllPlots

public void removeAllPlots()

Removes all the plots.

setMasterPlot

public void setMasterPlot(PlotData2D newPlot)
                   throws java.lang.Exception

Set the master plot for the visualize panel

Parameters:

newPlot - the new master plot

Throws:

java.lang.Exception - if the master plot could not be set

addPlot

public void addPlot(PlotData2D newPlot)
             throws java.lang.Exception

Set a new plot to the visualize panel

Parameters:

newPlot - the new plot to add

Throws:

java.lang.Exception - if the plot could not be added

getPlotPanel

public weka.gui.visualize.VisualizePanel.PlotPanel getPlotPanel()

Returns the underlying plot panel.

Returns:

the plot panel

main

public static void main(java.lang.String[] args)

Main method for testing this class

Parameters:

args - the commandline parameters